ACME SCREW LINEAR ACTUATORS

Type ATL 10-20-25-30-40
5 sizes of linear actuators available with 1 or 2 starts acme screw worm-wheel driven.
3-phase or 1-phase A.C. motors and permanent magnet D.C, motors. IEC B14 standardized motor flanges for all sizes of ATL except for ATL10 complete with motor.

Available accessories: load limitation slipping clutch (safety clutch)

                  * electrical or magnetic switches for adjustable stroke limit device
                  * antiturn device
                  * different front and rear attachments
                  * arrangements for encoder or manual driving

STANDARD STROKES: 100; 200; 300; 400; 500; 600; 700; 800 mm.

Type ATL 50-63-80
3 sizes of 1 starts acme screw linear actuators worm-wheel driven ;
2 starts acme screw, also available on request.
IEC B5 standardized motor flanges.

STANDARD STROKES; 200; 400; 600; 800; 1.000 mm.; special strokes on request.

Type UAL 1-2-3-4
4 sizes of acme screw linear actuators for high speed, timing belt drived.
3-phase or 1-phase A.C, motors and permanent magnet D.C. motors,
Electrical or magnetic limit switches device.

STANDARD STROKES: 100; 200; 300; 400; 500; 600; 700; 800 mm.

BALLS SCREW LINEAR ACTUATORS

Type BSA 10-20-25-30-40

5 sizes of balls screw linear actuators with same arrangements, attachments, accessories and strokes as the corresponding types of ATL.
3-phase or 1-phase A.C. brake motors and D.C. brake motors.
Suitable for heavy duty and continuous duty cycle.

Type BSA 50-63-80

3 size with IEC B5 motor flanges.

STANDARD STROKES: 200; 400; 600; 800; 1.000 mm.; special strokes on request.

Type UBA 1-2-3-4

4 sizes of balls screw linear actuators with same arrangements ,attachments, accessories and strokes as the corresponding types of UAL.
3-phase or 1-phase A.C. brake motors and D.C. brake motors.
Suitable for high speed and heavy duty and continuous duty cycle.

SCREW JACKS

Type MA

High efficiency acme screw jacks.
Model A: traveling screw Model B: traveling nut
Wide range of versions and accessories.
Long life synthetic oil lubrication.
2 starts acme screw or balls screw versions on request.

Type SJ

New cheaper and competitive type of acme screw jacks.
Model A: traveling screw Model B: traveling nut
Wide range of versions.
Long life synthetic grease lubrication.

BEVEL GEARS

Type BG

5 sizes of bevel gears produced in 2 or 3 shafts versions.
Suitable for synchronized motion of lifting stage systems.
Long life synthetic oil lubrication.